Skip to content

Wedding Alcohol Calculator

To find how much alcohol you need for a wedding, use a wedding alcohol calculator that turns guests and bar hours into bottles. For 100 guests over 5 hours with every guest counted as a drinker, it gives 66 bottles of wine, 165 beers and 11 bottles of spirits. It is a planning estimate, so confirm the result with your venue and caterer.

Free · runs in your browser · nothing is uploaded

Open on Seatlark

This embed was switched off for this website. Open on Seatlark

Add this tool to your siteFree embed code, no sign-up. Keep the credit link.

Embed this tool

Copy this code into your website, blog or class page. The tool runs inside your page.

Optional settings, added to the address after embed=1: &accent=0f6b5c (colour, 3 or 6 hex digits). Other parameters are ignored.

Please keep the credit link below the tool.

A wedding alcohol calculator turns a guest count and the length of the bar into a shopping list. This one counts drinks first, 2 in the first hour and 1 an hour after that, then converts them into bottles of wine, beers, bottles of spirits, champagne for a toast and pounds of ice, rounding bottles up. The example it opens with, 100 guests for 5 hours with every guest counted as a drinker, comes to 600 drinks: 66 bottles of wine, 165 beers (7 cases) and 11 bottles of spirits. If you follow the lower assumption that 70% of guests drink, the same party needs 420 drinks. Every conversion is shown, so you can check the arithmetic and change any assumption. Treat the result as a planning estimate and confirm it with your venue and caterer.

At a glance

A wedding alcohol calculator converts a guest count and bar length into a shopping list of bottles of wine, cases of beer, bottles of spirits, champagne for a toast and pounds of ice. It counts 2 drinks in the first hour and 1 an hour after that, then rounds bottles up.

  • A 750 ml bottle of wine pours 5 glasses of 5 fl oz.
  • Drinks are counted as 2 in the first hour and then 1 an hour after that.
  • Beer is counted in cases of 24, so 165 beers is 7 cases.
  • The 100-guest, 5-hour example includes a 10% buffer, and setting Extra buffer (%) to 0 drops it to 60 bottles of wine, 150 beers and 10 spirit bottles.
  • A US standard drink holds 0.6 fl oz, or 14 g, of pure alcohol, according to NIAAA.
  • Ice is planned at 1.5 lb per guest, or 2.5 lb if bottles and cans are also chilled in ice.
Wedding alcohol calculator example

How to use the wedding alcohol calculator

  1. Enter Guests (all ages), counting everyone who will be there.
  2. Set Hours the bar is open, starting from the first drink. The page opens with 5.
  3. Set Guests who drink alcohol (%). The page opens with 100; enter 70 to follow the lower assumption.
  4. Pick How much will they drink?: Typical is 2 drinks in the first hour, then 1 an hour; Heavy is 2 an hour.
  5. Choose the Bar: full open bar, beer and wine only, wine only, beer only, or a custom split with Beer %, Wine % and Spirits % that adds up to 100.
  6. Pick the Season, the Spirit bottle size (750 ml, 1 L or 1.75 L) and the Spirit pour (1.5 or 2 fl oz).
  7. Open More options to add a Champagne toast, to Chill bottles and cans in ice, or to change the Extra buffer (%).
  8. Read the sentence at the top and the six tiles, then the Shopping list (rounded up) table.
  9. Read the Assumptions, the safety line and the line that starts “Check with your venue, caterer or supplier” before you buy.

Reset returns the page to the starting figures. Copy summary, Download CSV and Print keep the result, and the page address stores your inputs, so a saved link reopens the same plan. Change one input at a time to see which line of the shopping list moves.

How much alcohol do I need for 100 guests?

For 100 guests with a full open bar for 5 hours and every guest counted as a drinker, plan on 600 drinks: 66 bottles of wine, 165 beers (7 cases of 24), 11 bottles of 750 ml spirits and 150 lb of ice. A 4-hour bar gives 500 drinks, 56 bottles of wine, 138 beers and 9 spirit bottles. If only 70% of guests drink, the 5-hour plan is 420 drinks: 48 bottles of wine, 116 beers (5 cases) and 8 bottles of spirits.

The table shows other sizes. It uses a full open bar, every guest counted, the typical pace, a 10% buffer, 750 ml spirit bottles and 1.5 fl oz pours.

GuestsHoursDrinksWine bottlesBeers (cases)Spirit bottles
5032002255 (3)4
5042502869 (3)5
5053003483 (4)6
5063504097 (5)7
100340044110 (5)7
100450056138 (6)9
100560066165 (7)11
100670078193 (9)13
150360066165 (7)11
150475084207 (9)13
1505900100248 (11)16
15061,050116289 (13)19
200380088220 (10)14
20041,000110275 (12)18
20051,200132330 (14)21
20061,400154385 (17)25

How many drinks per person should I plan for?

Plan 2 drinks in the first hour and 1 drink an hour after that. Over 5 hours that is 6 drinks each, over 4 hours it is 5, and a heavy crowd at 2 an hour has 10 over 5 hours. Zola applies this rule to every guest, while Mayfair Farms applies it only to guests who drink and assumes about 70% of adults do. It is a rule of thumb, not a standard, and the 70% assumption gives about 30% fewer drinks, so set Guests who drink alcohol (%) to match your crowd.

How do you calculate alcohol for a wedding?

The calculator follows these steps. The figures are the 100-guest, 5-hour example.

  1. Guests who drink: 100 × 100% = 100.
  2. Drinks: 100 drinkers × 6 drinks each = 600.
  3. Add the 10% buffer to each category: 600 × 1.1 = 660 drinks. A full open bar splits them 50% wine, 25% beer and 25% spirits, which is 330, 165 and 165.
  4. Wine: 330 drinks is 165 white and 165 red; at 5 glasses a bottle that is 33 bottles of each, 66 in all.
  5. Beer: 165 beers is 6.9 cases, rounded up to 7 cases of 24.
  6. Spirits: 165 ÷ 16 pours is 10.3, rounded up to 11 bottles.

The 10% buffer is our choice, not a standard, because running out is worse than leftovers. Set Extra buffer (%) to 0 and the same plan drops to 60 bottles of wine, 150 beers and 10 spirit bottles.

Glasses per bottle of wine

A 750 ml bottle pours 5 glasses of 5 fl oz. The bottle holds 25.36 fl oz, which is 5.07 glasses, and the calculator counts 5. One planning guide quotes 5 to 6 glasses and counts 5. White and red are rounded up separately, and white is half of the wine, or 75% in summer.

Spirits use the bottle size divided by the pour (1 fl oz is 29.57 ml), rounded down:

Bottle1.5 fl oz pours2 fl oz pours
750 ml1612
1 L2216
1.75 L3929

Each spirits drink counts as one pour, and beer counts as 12 fl oz bottles or cans. A champagne toast adds one bottle per 9 guests, rounded up.

What counts as a standard drink?

A US standard drink holds 0.6 fl oz, or 14 g, of pure alcohol (NIAAA). That is 12 fl oz of regular beer at about 5%, 5 fl oz of table wine at about 12%, or 1.5 fl oz of spirits at about 40%. The calculator shows the standard drinks per drinker: 6 in the example. A 2 fl oz spirits pour holds about a third more alcohol, so the same plan comes to 6.5 standard drinks per drinker. When a plan has more than one standard drink an hour after the first, a caution about food, non-alcoholic drinks and safe rides appears.

How do you serve alcohol responsibly?

Offer plenty of water, non-alcoholic drinks and food. Never serve minors or guests who have had too much, follow local licensing rules, which in many places mean a licensed bartender or a permit, and plan a safe ride home. Mixers, kegs, brands and cocktail recipes are not calculated.

How this tool works and where the numbers come from

Drinks per drinker follow the common planning rule of 2 in the first hour then 1 per hour; bottle counts come from 750 ml = 5 glasses of 5 fl oz and the spirit bottle size divided by the pour (1 fl oz = 29.5735 ml), rounded up per category. The US standard drink (0.6 fl oz or 14 g of pure alcohol) is from NIAAA.

Sources

Reviewed · Published by Seatlark

Short answers to common questions

How much alcohol should I buy for a wedding?

Start from guests, hours and the share who drink. With the page’s defaults (100 guests, 5 hours, every guest counted) buy 66 bottles of wine, 165 beers and 11 bottles of 750 ml spirits; with 70% drinking, 48 bottles, 116 beers and 8 bottles.

How much alcohol do I need for 50 guests?

For 50 guests over 4 hours with every guest counted, the result is 250 drinks: 28 bottles of wine (14 white, 14 red), 69 beers (3 cases), 5 bottles of spirits and 75 lb of ice. At 70% drinking it is 175 drinks, 20 bottles of wine, 49 beers and 4 bottles of spirits.

What if I only serve wine, or beer and wine?

Choose the Bar list. Wine only for 100 guests over 4 hours comes to 110 bottles (55 white, 55 red), and for 50 guests to 56 bottles. Beer and wine only for 100 guests over 5 hours is 88 bottles of wine and 220 beers (10 cases); wine and beer keep a 2 to 1 ratio.

How much champagne do I need for a toast?

One bottle for every 9 guests, rounded up: 12 bottles for 100 guests, 17 for 150 and 6 for 50. Tick Champagne toast under More options to add them.

How much ice do I need?

Plan 1.5 lb per guest for drinks, or 2.5 lb if you also chill bottles and cans. For 100 guests that is 150 lb (68 kg) or 250 lb (113.4 kg).

How many non-alcoholic drinks should I plan?

Count 2 servings per guest in the first hour and 1 an hour after that. For 100 guests that is 600 servings over 5 hours or 500 over 4.

How much liquor is in a cocktail?

The calculator counts one pour of 1.5 or 2 fl oz for each spirits drink. A cocktail made with two pours uses two pours of liquor, so a cocktail-heavy menu needs more spirit bottles than it shows: raise the spirits share in a Custom split.

Are the numbers a prediction?

No. They are estimates built on a planning rule, and real drinking varies a lot. Bottles are rounded up, which adds a small cushion; ask your caterer what they recommend and check your venue’s licence and return policy.