Skip to content

What Size Tablecloth for a 6 Foot Table?

The answer to what size tablecloth for 6 foot table is 60 × 102 in, which hangs 15 in on every side of a 30 in wide table. Pick the drop to see the cloth for a 6 ft table, or choose another length and width, such as 8 ft. If no standard size hangs close to the drop you pick, the tool says a custom cloth is needed.

Free · runs in your browser · nothing is uploaded

Open on Seatlark

This embed was switched off for this website. Open on Seatlark

Add this tool to your siteFree embed code, no sign-up. Keep the credit link.

Embed this tool

Copy this code into your website, blog or class page. The tool runs inside your page.

Optional settings, added to the address after embed=1: &accent=0f6b5c (colour, 3 or 6 hex digits). Other parameters are ignored.

Please keep the credit link below the tool.

What size tablecloth for a 6 foot table? The table is 72 in long, usually 30 in wide, and it takes a 60 × 102 in cloth for a 15 in drop on every side, or a 90 × 132 in cloth to reach the floor at 30 in high. This page works the answer out for your drop, width and height, and for 8 ft tables and the other lengths from 3 to 12 ft. Pick how far the cloth should hang and the tool shows the exact size, the smallest standard size that covers it and the drop it gives on the long sides and on the ends. Standard sizes come from rental catalogues and retail listings, and a size listed by only one source is marked with a dagger. If no standard size hangs close to the drop you pick, the tool says a custom cloth is needed.

At a glance

For a 6 ft table, the cloth is the table size plus twice the drop in each direction. A 6 ft × 30 in table with a 15 in drop needs a 60 × 102 in cloth.

  • The table is 72 in long, usually 30 in wide.
  • For a 6 ft × 30 in table, a 60 × 102 in cloth hangs 15 in on every side.
  • For floor length on a 30 in high table, the cloth is 90 × 132 in.
  • The table length list offers 3, 4, 5, 6, 7, 8, 10 or 12 ft.
  • The tool picks the smallest standard size that covers the cloth in both directions, and says a custom cloth is needed when no standard size hangs close to the drop.
What size tablecloth for 6 foot table example

How to find the cloth for a 6 foot table

The page opens with a 6 ft × 30 in table, 30 in tall, and a Half drop (15 in).

  1. Choose Units: inches, centimetres or feet.
  2. Set Table length. The list offers 3, 4, 5, 6, 7, 8, 10 or 12 ft.
  3. Set Table width: 18, 24, 30, 36, 42 or 48 in. A 30 in width is the usual banquet and folding table.
  4. Enter the Table height (to the floor). It is 30 in unless you type another.
  5. In How far should it hang?, pick Casual (about 8 in), Standard (about 12 in), Half drop (15 in) or Floor length.
  6. Read the sentence at the top, then one tile per drop with the smallest size sold and the drop it gives.
  7. Open the table 6 ft × 30 in table: every drop for the exact cloth beside each size.
  8. Open Same width, other lengths to see the same drop for tables from 3 to 12 ft.
  9. For an 8 ft table, set Table length to 8 ft and read the same tiles again.
  10. If your table is not 30 in high, change Table height (to the floor); only the floor-length answer and the lap note depend on it.

Copy summary, Download CSV and Print keep the result, and Reset starts again. The page address stores your inputs. Under the result, check the assumptions before you order.

What size tablecloth for a 6 foot table?

For a 6 ft × 30 in table a 60 × 102 in cloth hangs 15 in on every side, which covers both the standard 12 in drop and the 15 in half drop. For a cloth that reaches the floor, use 90 × 132 in at 30 in high. The cloth is the table size plus twice the drop in each direction, and the tool then finds the smallest standard size at least that big.

DropExact clothSmallest size soldDrop you get
Casual, 8 in46 × 8860 × 90†15 in sides, 9 in ends (custom needed for 8 in)
Standard, 12 in54 × 9660 × 10215 in all round
Half drop, 15 in60 × 10260 × 10215 in all round, exact fit
Floor length, 30 in90 × 13290 × 13230 in all round, exact fit

† Listed by one source only. Sizes are in inches.

The tool never offers a size that gives less drop than you asked for. A 60 × 90 is not the answer at the standard drop: the exact cloth is 54 × 96, and 60 × 90 would hang only 9 in at the ends instead of 12. At the casual 8 in drop even 60 × 90 hangs 15 in on the sides and 9 in on the ends, so the tool says no standard size hangs 8 in on this table and a custom cloth is needed. A 60 × 108 is not the best either. It gives 15 in on the long sides but (108 − 72) ÷ 2 = 18 in at the ends, and it is bigger than the 60 × 102 that gives 15 in everywhere. At floor length ask for rounded corners, because corners hang lower than the sides.

What size tablecloth for an 8 foot table?

For an 8 ft × 30 in table, a 60 × 120 in cloth gives 15 in on the sides and 12 in on the ends, which fits the standard drop. The half drop is an exact fit with 60 × 126 in†, because 60 × 120 would give only 12 in at the ends. Floor length is 90 × 156 in, an exact fit.

The table shows a 30 in wide table of every length at half drop and at floor length:

Table lengthHalf drop, 15 inFloor length
3 ft60 × 84† (15 sides, 24 ends)90 × 132 (30 sides, 48 ends)
4 ft60 × 84† (15 sides, 18 ends)90 × 132 (30 sides, 42 ends)
5 ft60 × 90† (exact)90 × 132 (30 sides, 36 ends)
6 ft60 × 102 (exact)90 × 132 (exact)
7 ft60 × 120 (15 sides, 18 ends)90 × 156 (30 sides, 36 ends)
8 ft60 × 126† (exact)90 × 156 (exact)
10 ft78 × 156† (24 sides, 18 ends), custom needed for 15 innone; a 10 ft table needs 90 × 180
12 ftnonenone

What size is a 6 foot rectangular table?

It is 72 in long. The usual width is 30 in, and folding tables are also made 18 and 24 in wide. One cloth maker’s guide gives 30 in as the most standard width and lists 29 in as its table height; the page assumes 30 in, so type your own height if it differs. At 29 in the floor-length answer stays 90 × 132 in and 1 in of cloth lies on the floor.

Width changes the drop on the sides. At a 12 in drop a 6 ft × 18 in table takes 60 × 102 (21 in sides, 15 ends, so the tool says no standard size hangs 12 in on it), and a 6 ft × 48 in table takes 72 × 120† (12 in sides, 24 ends, within 6 in of the floor). At floor length a 6 ft × 24 in takes 90 × 132 (33 in sides, 30 ends) and a 6 ft × 36 in takes 108 × 156 (36 in sides, 42 ends, 12 in on the floor).

How this tool works and where the numbers come from

Cloth size = table size + 2 x drop in each direction; the tool picks the smallest standard size that covers it in both directions and reports the drop on the sides and on the ends. A 6 ft table is 72 in long. Standard sizes are from linen makers and rental catalogues.

Sources

Reviewed · Published by Seatlark

Short answers to common questions

What size tablecloth should I get for a 6 ft table?

Use 60 × 102 in for a 12 to 15 in drop (15 in all round), or 90 × 132 in for floor length on a 30 in high table. Confirm that your supplier stocks the size, because makers differ.

What size tablecloth do I need for a 6 seater rectangle table?

The number of seats does not set the cloth; the length and width of the table do. Measure the table, enter them above, and choose a drop. The tool does not say how many people a table seats.

Will a half drop touch guests’ laps?

On a 30 in table, probably. A chair seat is about 18 in high, so a cloth that hangs more than 12 in rests on or brushes laps. That is normal for banquet cloths. The tool checks the drop the sold cloth gives, and the Standard 12 in answer, 60 × 102, hangs 15 in, so it carries the same note.

What if my table is 29 in or 42 in tall?

Height changes the floor-length answer and the lap note. At 29 in, floor length needs 88 × 130 in and the smallest size sold is still 90 × 132 in. At 42 in, a 6 ft × 30 in table needs 114 × 156 in, which is larger than any standard size in the list.

Is a 60 × 90 cloth big enough for a 6 ft table?

It covers the width but hangs only 9 in at the ends and 15 in on the sides. The tool lists it for the Casual drop but says a custom cloth is needed for 8 in; for an even drop use 60 × 102 in.

Why does a 12 ft table show no standard size?

The list holds nothing big enough: a 12 ft × 30 in table at half drop needs 60 × 174 in, and 10 ft and 12 ft tables at floor length need 90 × 180 in or more. The tool says “no standard size”; ask a linen company for a custom cloth.

How is the tablecloth size worked out?

The cloth is the table size plus twice the drop in each direction. For a 6 ft × 30 in table with a 15 in drop, the length is 72 + 2 × 15 = 102 in and the width is 30 + 2 × 15 = 60 in. That gives a 60 × 102 in cloth.

What size tablecloth for an 8 foot table?

For an 8 ft × 30 in table, a 60 × 120 in cloth gives 15 in on the sides and 12 in on the ends, which fits the standard drop. The half drop is an exact fit with 60 × 126 in, a size listed by one source only. Floor length is 90 × 156 in, an exact fit.