Skip to content

Tablecloth Size Calculator

A tablecloth size calculator adds twice the drop to your table size, then finds the smallest standard cloth that covers it. Enter the table shape, size and drop to get the exact cloth, the smallest standard size that covers it, and the drop that size really gives. Makers differ, so confirm your supplier stocks the size before you order.

Free · runs in your browser · nothing is uploaded

Open on Seatlark

This embed was switched off for this website. Open on Seatlark

Add this tool to your siteFree embed code, no sign-up. Keep the credit link.

Embed this tool

Copy this code into your website, blog or class page. The tool runs inside your page.

Optional settings, added to the address after embed=1: &accent=0f6b5c (colour, 3 or 6 hex digits). Other parameters are ignored.

Please keep the credit link below the tool.

A tablecloth size calculator adds the drop you want to your table, then checks which cloth you can actually buy. Enter a round, rectangular, square or oval table, its height and a casual, standard, half-drop, floor-length or custom drop. The result gives the exact cloth, the smallest standard size that covers it in both directions, and the drop that size really hangs on the sides and the ends. For a 60 in round table at a 12 in drop the exact cloth is 84 in, and an 84 in round is a standard size, so it is an exact fit. When no standard size hangs close to the drop you asked for, the tool says so instead of quietly giving a much longer cloth.

Enter your table shape and size in the calculator above, then compare every drop in the table it shows before you order.

At a glance

A tablecloth size is the table size plus twice the drop in each direction. The calculator then picks the smallest standard size that covers that figure in both directions and reports the drop that size really gives.

  • The cloth is the table plus twice the drop in every direction: tablecloth size = table size + 2 × drop.
  • For a 60 in round table at a 12 in drop the exact cloth is 84 in, and an 84 in round is a standard size, so it is an exact fit.
  • The calculator offers Casual at about 8 in, Standard at about 12 in, Half drop at 15 in and Floor length, which equals the table height.
  • The list holds round cloths of 60, 70, 84, 90, 96, 108, 120 and 132 in, fourteen rectangles from 52 × 70 to 108 × 156 in, and squares of 54, 60, 72, 84 and 90 in for square tables.
  • Sizes work in inches, centimetres or feet, and the standard sizes come from rental catalogues and retail listings.
  • The tool also warns when a cloth hangs within 6 in of the floor or reaches it.
Tablecloth size calculator example

How to use the tablecloth size calculator

The page opens with a 60 in round table, 30 in tall, and a Standard (about 12 in) drop.

  1. Under Units, choose inches, centimetres or feet. Numbers already typed are converted.
  2. Pick the Table shape: Round, Rectangle, Square or Oval.
  3. Type the Diameter of a round table, the Length and Width of a rectangle or oval, or the Side of a square.
  4. Enter the Table height (to the floor). Banquet, folding and dining tables are about 30 in; stand-up cocktail tables are 42 in.
  5. In How far should it hang?, choose Casual, Standard, Half drop, Floor length or Custom. Custom adds a Custom drop box.
  6. Read the sentence and the four tiles: Exact cloth size, Smallest size sold, Drop you get and Table height.
  7. Open the table Every drop for this table to compare all the drops side by side.
  8. Read the Assumptions and the line that starts “Check with your venue, caterer or supplier” before you order.

Copy summary, Download CSV and Print keep the result, and Reset starts again. The page address stores your inputs, so a link reopens the same table. Change one input at a time to see which size moves, switch Units to read the same answer in centimetres, and use Custom for a drop the list does not offer, such as 10 in.

How do you calculate tablecloth size?

The cloth is the table plus twice the drop in every direction: tablecloth size = table size + 2 × drop. A round cloth is the table diameter plus twice the drop. To work back from a cloth you already own, halve the gap between cloth and table: (cloth − table) ÷ 2 is the drop.

For example, a 36 in round table with an 8 in drop needs 36 + 2 × 8 = 52 in. A 72 × 36 in oval at a 12 in drop needs 72 + 24 = 96 in by 36 + 24 = 60 in. If the table has a leaf you will use, measure it with the leaf fitted.

Exact cloth vs the size you can buy

The exact cloth is the size your table needs at the drop you chose. The smallest size sold is the smallest standard size that is at least that big in both directions, so the drop you get is never less than the drop you asked for. Among sizes that cover the table the one with the smallest area wins, and a tie goes to the narrower width.

A 60 in round table, 30 in tall, shows how it works:

DropAskedExact clothSmallest size soldDrop you get
Casual8 in76 in84 in round12 in
Standard12 in84 in84 in round12 in, exact fit
Half drop15 in90 in90 in round15 in, exact fit
Floor length30 in120 in120 in round30 in, exact fit

At the casual drop the tool also notes that one size down is a 70 in round†, which would hang only 5 in.

Rectangles need both directions. A 6 ft × 30 in table (72 × 30 in) at a 12 in drop needs 54 × 96 in. A 60 × 90 cloth covers the width but is 6 in short in length, so the answer is 60 × 102 in, which hangs 15 in on every side.

The list holds round cloths of 60, 70, 84, 90, 96, 108, 120 and 132 in, fourteen rectangles from 52 × 70 to 108 × 156 in, and squares of 54, 60, 72, 84 and 90 in for square tables. The 60, 70 and 84 in rounds are retail sizes from listings opened on 26 October 2026; the larger rounds come from rental catalogues. A dagger marks a size that only one source lists, and makers differ, so confirm your supplier stocks it.

When the smallest size that covers the table hangs more than 6 in longer than the drop you asked for, and no standard size comes within 6 in of it, the tool says so. A 30 in round table at a casual 8 in drop needs 46 in; the smallest round is 60 in, which hangs 15 in, so the answer is “no standard size hangs 8 in on this table” and you need a custom cloth. If nothing is large enough it says “no standard size”: a 200 in round table needs 224 in, so ask a linen company for a custom cloth.

How much should a tablecloth hang over the table?

The calculator offers Casual at about 8 in, Standard at about 12 in, Half drop at 15 in and Floor length, which equals the table height: 30 in on a 30 in table. Guides give 6 to 8 in for casual and 8 to 12 in for formal settings, and the tool’s 8 in and 12 in sit inside those ranges.

A standard chair seat is about 18 in high, so on a 30 in table a cloth that hangs more than 12 in rests on or brushes laps. The tool judges this from the drop the sold cloth really gives, not the one you asked for, and adds a note; it is normal for half-drop banquet cloths. It also warns when a cloth hangs within 6 in of the floor or reaches it. For floor length on a rectangle or square ask for rounded corners, because corners hang lower than the sides.

Does table shape matter for tablecloth size?

Yes. A round table needs one diameter, a square one side, and a rectangle or oval a length and a width. An oval takes a rectangular cloth sized on its length and width, and the cloth pleats at the curved ends. For a 72 × 36 in oval at a 12 in drop the exact cloth is 60 × 96 in; the smallest size sold is 60 × 102 in, hanging 12 in on the sides and 15 in on the ends.

How this tool works and where the numbers come from

Cloth size = table size + 2 x drop in each direction (round: diameter + 2 x drop). The tool then picks the smallest standard size that covers that size in both directions and reports the drop that size really gives. Drop lengths and standard sizes are from linen makers and rental catalogues.

Sources

Reviewed · Published by Seatlark

Short answers to common questions

What size tablecloth do I need for my table?

Add twice the drop to the table size in each direction, then round up to a size that is sold. Enter the shape and size above and the tool does both steps, then shows the drop the sold size really gives.

Should a tablecloth touch the floor?

For a formal look it can. Choose Floor length and the drop equals the table height, 30 in on a 30 in table. Casual and standard drops stop at or above the lap instead, and the tool warns when the cloth it finds hangs near the floor.

What is a full-drop tablecloth?

A full drop reaches the floor, so the drop equals the table height. In the calculator that is the Floor length option. A 60 in round table at 30 in high needs a 120 in round cloth.

What size tablecloth for a 60 inch round table?

At a 12 in drop the exact cloth is 84 in, and an 84 in round is an exact fit. For half drop it is a 90 in round and for floor length a 120 in round. The table above shows every drop.

Which tablecloth fits a round table 120 cm across?

A 120 cm table is 47.24 in. At a 12 in drop the exact cloth is 71.24 in (181.0 cm). The smallest size sold is 84 in (213.4 cm), which hangs 18.4 in; the tool notes that a 70 in† round would hang 11.4 in, a little less than asked. The standard sizes are US inch sizes that the tool converts.

Can I use it for a 6 ft table?

Yes: choose Rectangle, 72 and 30. The tablecloth size for 6 foot table page lists every drop for 6 ft and 8 ft tables.

What if no standard size is large enough?

The tool says “no standard size” and does not guess. Ask a linen company for a custom cloth, or use two cloths. It does the same when a drop would need a custom cloth because the nearest standard size hangs far longer or shorter.

Does it cover overlays, runners or seat counts?

No. It sizes one cloth for one table. Overlays, runners, stretch covers, prices and seat counts are not included.